Fence Repair Cost Guide — DFW 2026
Real contractor pricing for fence repairs and replacements in the Dallas-Fort Worth area — so you know what a fair quote looks like.
What Does Fence Repair Cost in DFW?
Fence repair costs in DFW range from $50 for a single board replacement to $6,500 or more for a full cedar privacy fence replacement. The most common fence repairs in DFW involve post rot, storm damage from severe thunderstorms, and wood deterioration from the intense heat and UV exposure. Cedar is the most popular fence material in DFW due to its natural rot resistance and typically runs $20 to $45 per linear foot installed for a full replacement. Individual post and board repairs are significantly cheaper and can often be handled by a handyman.
What Affects the Cost of Fence Repair?
- •
Extent of damage — single board vs full section vs full fence replacement
- •
Wood species — cedar costs more than pine but lasts significantly longer in DFW
- •
Post depth and concrete — deeper posts with more concrete cost more but last longer
- •
Gate hardware — gate repairs add cost depending on latch and hinge type
- •
Fence height — taller privacy fences cost more per linear foot
- •
Demolition and haul away — removing an old fence adds $1 to $3 per linear foot
- •
Storm volume — after major DFW storms fencing contractors book up fast and prices may rise
Fence Repair Cost Breakdown
| Repair Type | Typical Cost Range | Notes |
|---|---|---|
| Single board replacement | $50 – $150 | Per board including labor |
| Post replacement | $150 – $350 | Per post including concrete |
| Section repair (6–8 feet) | $200 – $500 | Boards and rails |
| Gate repair | $100 – $300 | Latch hinge or frame |
| Full cedar fence (per linear foot) | $20 – $45 | Installed |
| Full cedar fence (150 linear feet) | $3,500 – $6,500 | Average DFW backyard |
| Fence staining or sealing | $1 – $3 per linear foot | Extends fence life significantly |
Staining or sealing a cedar fence every 2 to 3 years significantly extends its life in DFW's harsh climate. Budget $300 to $600 for a full backyard fence staining.
Real Project Examples
Storm Damage Repair
Mansfield homeowner had 3 posts snap and 24 feet of fence fall during a spring thunderstorm. Contractor replaced posts and repaired the section. Total cost: $1,100.
Full Replacement
Same homeowner chose full fence replacement after contractor identified widespread post rot. 160 linear feet of cedar with 3-foot concrete footings. Total cost: $5,200.
Gate Repair
Keller homeowner had a sagging double gate that would not latch. Contractor reset the posts in fresh concrete and replaced the hardware. Total cost: $425.
DIY vs Hiring a Contractor
DIY Possible
Replacing individual fence boards is one of the most beginner-friendly DIY repairs. Boards cost $3 to $8 each and only a drill and screws are needed. Single post replacement is also manageable for a motivated DIYer with a post hole digger and concrete mix.
Hire a Contractor
Full section replacements, repairs involving more than 3 posts, or any fence work after a major storm are better handled by a fencing contractor. After DFW storms, get on the schedule quickly — contractors book up within days.
Have a Broken or Damaged Fence?
Upload a photo and get an AI diagnosis with a real price estimate in 30 seconds. Free. No signup required.
Get Free Fence Diagnosis